Why Photo Identification is Important

Why Photo Identification is Important

Impressions Matter – the Shure Beta 58A

As a recording artist, I always marvel at the way I use the various instruments to my advantage. The sound that comes out of these instruments adds to my voice, and the result is just awesome. Right before I delved into music, one of my mentors told me the only way to get awesome music is to use only the best equipment. One such mic that I found to be top of the pack is the Shure Beta 58A mic.

This mic is a handheld dynamic microphone ideal for both male and female voices, whether you are belting out a slow, romantic melody or hitting the highs in a rock and roll tune, this mic is the king.

First Impression

When I first opened the box, the weight only made me think no way such a light mic could give me the punch I needed but I was wrong. The design is awesome, and it fits my hand so perfectly. Apart from a great design, you can hammer nails with it (not literally, of course) because it is hardy and withstands the test of harsh conditions.

The first thing I noticed about the Shure Beta 58A is the high, crispy clear sound. The sound was so high that I expected boominess and feedback, but alas, the use of the supercardioid polar pattern keeps the signal so tight that it eliminates any sounds originating from the rear or the sides. At first, I didn’t notice a tiny detail about the Shure Beta that made it a darling globally. One time I listened keenly and got it – the super-high gain that came just before feedback that made each given performance a hit.

Producing great sound isn’t enough for a mic, the mic you have ought to stand up to the game, pub after pub, stage after stage, town after town and city after city.to borrow from Shure’s long history of dependability, the Beta 58A gives you just that.

The performance of the mic is not affected in any way by rough handling due to its rugged construction. Therefore, whether you hold the mic in your hand or go ahead and mount it on a stand, you still achieve the kind of sound that you planned.

Precious Midrange Lift

I haven’t heard this with other mics, maybe counterparts from Shure. However, when using the Shure Beta, I noticed the little midrange lift in the frequency response. This lift occurred smack on the middle of the vocal frequency spectrum (50Hz – 16 kHz). You get to hear it loud and clear.

I would advise you though, if you want to make maximum use of the wide frequencies, make sure you consider your voice timbre and genre of music. This is because these two affect the performance of the microphone and how you will sound.

Hit The Highs – You Have a Cushion

This mic is innovatively designed to handle the high sounds from your amp and guitar. The design makes use of an internal shock-mount system that handles the noise. To make this better, the steel mesh grille is lined with a foam pop filter that allows you to hit the highs, so, get rocking (and rolling) without any hesitation; Shure Beta58A has your back.

I remember this one time when we were on stage strumming, singing and drumming away when all of a sudden my bass guitar player decided to let it rip. He just got so engrossed in the heat of the moment that he decided to be twice as loud. Nothing changed, as I learnt later, the supercardioid pattern rejected the loud peripheral vocals and minimized the feedback like a champ. We got to know about the incident later when he narrated the issue to us.

You might argue that you can still hit the highs using the SM58, but remember the 58A comes with a neodymium magnet, which is more sensitive as compared to the SM58. To be more specific, the output of the beta 58A is 4 decibels higher than its predecessor.

Enhance Your Vocals

I have a softer mellow voice, so my aim was to get a mic that could enhance my vocals in the studio. I tried several other mics but found them wanting. For one, I had to be as close to the mic for these mics to pick my voice and amp it up. The first time I tried the beta 58A I was blows away by the crispy clear sound. In addition, when I cranked the gain a little bit higher, there was no hissing from the speakers. I realized that even when I stayed 1 to 2 inches away from the mic, my voice still came out clear.

The sensitivity is out of this world. This enabled me to change the sound and the feel by distance and positioning.

Got a Band? Get a Few More of These

I don’t work solo all the time, I work with a small band, practicing in the basement for upcoming shows. My backup singer, who doubles as a drummer, has a deep voice that isn’t that strong. We needed a microphone that has a narrower pattern so that it doesn’t pick up a lot of the percussion sounds from the drum. Using this mic picked up the vocals and projected them much better, adding substance to the whole remix. A very interesting side note is when we went to listen in to one of the top bands in the city, we noticed right away that the lead vocalist was using a Shure Beta 58A and he sounded so great.

Well, I have used this mic for live gigs using just an acoustic guitar, and I’ve also used it for practice with my 6 piece band. Either way, it beat any other mic I have used hands down.

The Lowdown

As we speak, I’m planning to purchase another Shure Beta 58A mic just so that when I need an extra singer, I have one of the best mics ready. The Beta 58A makes me want to belt out tune after tune, now the band hates me for making them perform longer. However, they like the fact that they get a superb response after each gig. Even on small stages, I still get the response I want. My mic has kissed the floor so many times to the extent that if it were just another mic, it would be history. But since it is so hardy, it has stood the test of so many bumps and drops.

You don’t believe me? Well, we are so many singers who make use of this mic for their gigs. Check out Shure Beta 58A – Review by Microphone Geeks to know that you need to upgrade your mic – now.

6 Reasons Why You Should Vacuum Your Carpet

One of the best ways to maintain your carpet’s cleanliness is to vacuum it. But not many people are actually doing this to clean their carpets.

Vacuuming is extremely easy and almost anyone can do it. Even if you’ve never done it before, you’ll be able to do it right. If you’re not vacuuming your carpet properly and on a regular basis, here are a few of the best things you’re definitely missing out on.

Maintains the quality of carpet

Carpets can be pricey and neglecting them may mean that you will have to replace them shortly. Vacuum cleaning your carpets can play an important role in maintaining their quality by getting rid of dirt, dust, as well as other particles that may damage it. Regular vacuuming can really help to prolong your carpet’s lifespan.

Helps get rid of dirt and dust

Removing dirt and dust can be really crucial in keeping carpets clean and beautiful. Every day, plenty of dirt and dust can get into your carpet, so it’s vital to vacuum your carpet regularly so you have the best shot at maintaining its cleanliness and overall condition.

Removes allergens

Another reason to vacuum your carpet regularly is to get rid of dust as well as other allergens from your house. Dust mites like to hide in carpets. In fact, they are one of the worst household allergens. In addition, removing dust from your carpet helps to maintain its look.

Removes pet hair

Vacuuming your carpet can help remove pet hair, which helps to keep your carpet smelling like it’s supposed to, instead of smelling like some of your pets. Since your pets like to rest on the carpet, they can leave an unpleasant musty smell. Different cats and dogs shed plenty of fur, so make sure to vacuum your carpet more frequently.

Protects family health

While you may not always tell just from checking your carpet, there are lots of things that may lead to health problems in your family without being noticed. For example, in areas with higher humidity, carpets have an increased risk of getting mold if not maintained properly. Otherwise, carpets are like giant filters and catch all kinds of particles and dust mites, which can cause problems for people with asthma or allergies.

Increases carpet longevity

If you vacuum your carpet regularly, it’ll retain its texture and color much longer than if you don’t do it for a long time. This will prolong the life of your carpet and you might even squeeze a few extra years out of it.

There are plenty of carpet vacuums on the market these days that can help to clean your carpets well and really improve the quality of your indoor air as well. Regular use of modern and advanced carpet vacuums helps to reduce symptoms of asthma and allergy. With a good carpet vacuum, you can get more than 90 percent dust and dirt out of your carpets. Then you will be on the right track to enjoying a clean, fresh, and healthy home.

How to Spot Substandard Juicers

If you’re in the market for a juicing machine, you may be wondering how to spot a substandard juice from one of better quality. There are dozens of models on the market. How can you choose a good one?

Do Your Research

The most important thing to research is the types of juicers available. There are centrifugal, masticating, and citrus juicers, and each offer their own advantages and disadvantages.

A centrifugal juicer works like your blender to slice and dice food to produce juice. A masticating unit uses one or two gears to grind food, effectively extracting juice. And a citrus juicer is specifically for citrus fruits like oranges and lemons.

Centrifugal units produce juice more rapidly, but they also end up with more waste material. A masticating juicer takes longer to produce, but uses more of the food product while extracting juice more effectively from hard produce such as carrots and leafy green vegetables.

Many online retailers offer model comparison, so you can look at various but similar machines side-by-side. This allows you to compare features to find the one that’s best for you. You can also discover more useful facts by visiting website about juicing in general.

What to Consider When Purchasing

There are some important things to keep in mind when you’re comparing juicers. Let’s look at some of these features.

Motor Wattage

Wattage might be the most important consideration in a juicer. What does wattage mean for you? Well, juicers must break down foods to extract the juice. Soft foods like berries and oranges can be easily processed, but harder foods are more difficult to chew and will require more power to extract juice.

Juicer wattage ranges from 400 to 1,000 watts. Logic says the higher the wattage, the better the performance. When you’re talking about juicers, this is true as well. Higher wattage motors won’t bog down under a heavy load and can stand up to longer stretches of use without overheating.

Extra Features

Many juicers offer extra features to make the juicing experience more pleasant. These features can include:

  • Pulp Ejection—some juicers have internal pulp (waste) storage, which may require removing parts of the juicer to clean out. External pulp reservoirs make it easier to clean out.
  • Adjustable speeds—having two or more motor speeds can help you extract juice from foods with different density. Juicing soft foods at high speeds can cause frothing of the juice.
  • Large Feed Tube—this lets you put foods into the juicer in larger pieces, reducing your preparation time.
  • Self-Cleaning—some masticating juicers are self-cleaning, reducing the time spent cleaning the machine.
  • Twin Gears—on masticating juicers, double gears will produce juice faster than a single gear.
  • Slicer—some citrus juicers have a built-in slicer, which reduces prep time.
  • Multiple Reamers—on some citrus juicers, you’ll find more than one reamer. This allows you to juice two fruit halves at one, cutting down on time.
  • Reamer Size Attachments—some citrus juicers have assorted size reamers to accommodate both large and small fruits.

Read Reviews by Actual Consumers

Another way to spot a substandard juicer is to take the time to read reviews left on retailer websites. Most of these reviews are by actual customers who purchased and used the product.

Make it a point to read the bad reviews as well as the good. Some of these bad reviews may amount to nothing more than “I didn’t like using the juicer”, but others may well give you insights into the long-term use of the machine.

Read any review and take the information with a grain of salt. Ask yourself how these comments may affect you personally. If someone says, “this juicer takes a lot of time” and you want something that’s quick and easy, you’ve just learned valuable information.

Don’t Be Fooled by Brand Names

As with a lot of products, sometimes what you’re paying for is the brand name. But, often that doesn’t equate to quality. This is one reason reading reviews is critical in helping you decide on your purchase.

Instead of jumping at a brand-name juicer, look at the features, paying close attention to motor wattage. Just because it has a reputable name attached to the juicer doesn’t mean its features will live up to that name.

Conclusion

Now you’ll have a better idea what to look for when you’re shopping for a juicer. Hopefully the tips listed here will let you pick a great juicer that will give you a long life of healthy juicing!

Aggressive Fish: What You Need to Know

The picture of an aquarium is usually one that is serene with fish moving around slowly. Well, some of us love some action in our aquariums, which requires you to have some aggressive freshwater species in the tank. You need to stick to one rule though, when introducing the aggressive fish, you need to make sure that they are compatible with existing species. Let’s have a look at the options you have.

Siamese Fighting Fish

Male Siamese fighting fish are aggressive, especially when two male species are put in the same aquarium. They will most likely fight to their death in such a situation. This is natural to them, because they use this aggressiveness to establish territories for mating and feeding. Female Siamese fighting fish don’t do this, they can live communally.

You can place male Siamese fighting fish in a tank with other species, but you have to take great care. If the other species have similar appearance to the fighting fish or if the tank is too small, then fights could occur, which can be detrimental for the other non-aggressive species.

Red Bellied Piranha

No fish species can get more aggressive than the red-bellied piranha. However, this fish can stay communally with its own species. Woe unto you if you introduce a different species, you will have created a meal for them.

These fish can grow to up to 12 inches long, and will feed on fish species that are smaller. So, to avoid losses and seeing your favorite fish torn to pieces, don’t incorporate this piranha species into an aquarium having other species.

Paradise Fish

Similar to Siamese fighting fish, the female species of the paradise fish don’t display any aggressiveness. Males can be aggressive, but this is mainly to establish a pecking order in the aquarium. Once this is established, then the fish tend to be less aggressive.

Angelfish

The name shouldn’t fool you – these fish are beautiful, yes, but as aggressive as they come. These fish are choosy, and will coexist with tetras quite well, but get aggressive when you introduce guppies into the tank.

Angelfish also tend to pierce smaller fish to death, which makes it wise to avoid adding smaller fish to a tank containing angelfish.  If you wish to add other species to a tank containing angelfish, make sure to do this when you have fed the angelfish and when it is dark.

Either way, you need to keep the aquarium clean for whatever species you choose. Here are tips to do this:

Always use a good cleaning brush to clean the filter and the tank itself. Clean the filter because it eliminates the bacteria that have settled on it. If you own a bigger tank, get a bigger brush. You also need to clean the gravel present in the aquarium. Doing this removes any waste present in the gravel.

At times, algae can be stuck to the glass. Use a scraper to remove this algae from the glass. Don’t use a razor due to the harshness that can cause scratches.

Final Words

Well, a serene aquarium can be a great addition to any home, but an aquarium with aggressive fish makes everything faster. This is reason enough to add some aggressive fish to your aquarium. However, make sure you understand how the aggressive fish behave before buying some. Start your hobby of keeping aggressive fish by visiting Come into the Water today.

Different Floors Types Care and Maintenance

The popular saying by Benjamin Franklin ?an ounce of prevention is worth a pound of cure,” is applicable in home maintance.  Taking care of your floor type which includes proper maintenance increases its life span and saves you unnecessary repair costs. Or, replacement costs altogether. As you outsource for professional cleaning and maintenance it helps to know your floor type and the rights products to use. Here are some tips about different floor types and their right care from cleaning services derby

Vinyl Floor

Generally, vinyl floors are easy to clean and maintain. Use a wet mop to clean spills, and when you want to wash the floor, a neutral floor cleaner should help. In case the floor gets streaks and films after mopping, wipe it using a solution of vinegar and water to bring back the sparkle. Avoid pouring water on the floor since it will loosen the adhesive causing the vinyl to detach from the surface underneath.

Asphalt Tile / Linoleum

With this floor type, avoid products that have a PH above 10 since they will emulsify the protective coating and cause rapid deterioration to the floor.  Products with a PH range of 7-10 work exceptionally well with linoleum.

Ceramic / Porcelain Tile

Ceramic is resistant to acids, alkaline, and solvents used in cleaning.  While this floor is virtually resistant to most elements, the fillings surrounding them may not be impervious. Acidic products will eat way at some fillings as it would lime deposits so ensure that whenever you use acidic products, you rinse the surface thoroughly.

Wooden floors

There are various types of wood just as there are many types of coatings for them. Wooden floors work well with mild or neutral solutions. When cleaning these floors, keep the amount of rinse water and the cleaning solutions to the minimum to avoid soaking the wood.

Marble floor

Marble can either be polished or unpolished. Polished marble is porous and stains very easily. Avoid using vanish or lacquer as it will peel off very quickly. Polished marble floor may not be as porous, but it also needs to be sealed because it can also stain. Use a mixture of warm water and an all-purpose cleaning solution to mop the floor.

Concrete

The densification and polishing process that concrete floors go through make this type very durable. However, if not properly maintained, especially if located in retail facilities and other high traffic areas, they will eventually lose the gloss and end up looking dull.

Unlike other types that require regular waxing and sealers, concrete floors are generally easy to maintain. Routine maintance requires using a dust mop to keep the floor free from debris. Here, automatic scrubbers and low suds cleaners are the most economical and productive options from cleaning concrete floors. Its recommended that you use neutral-ph. cleaners. Cleaners that are too alkaline or too acidic will make the floor lose its sparkle.

The condition of your floor, whether in your house or at the office, creates lasting impressions about you. So, make sure yours conveys the right messages.